Sign In Free Trial

Cookies help us keep our website safe and give you a better experience. Read more or change your cookie settings.

We use cookies to give you the most relevant experience.

Defense Products Catalog — Page 138

Sort by

All categories

Manufacturer

Region

81 mm submunition bomb RS6A2

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm submunition bomb RS6A2

Armament For L16 , M252 and similar high-pressure 81 mm mortars. Development By Simmel for use in the Breda and other appropriate mortars. Description The RS6A2 is a long bomb with an alloy body in two parts. The forward section is threaded for a time fuze, has an expelling charge and pusher plate beneath the fuze and the interior holds nine submunition bomblets. The rear section is a push-fit into the front and is retained by a number of shear pins. A tailboom and six fins are extruded from aluminium and attached to the end of the rear body section. The propelling charge consists of a primary cartridge inserted into the tailboom and six secondary charges fitted around the boom in horseshoe containers. After firing, the time fuze functions at the selected time to give a burst 350 m above the ground at the required range. The fuze ignites the expelling charge which, by pressure on the pusher plate and through the payload, shears the retaining pins and throws the rear body and tail unit clear. The submunitions are then expelled from the body and dispersed around the trajectory; the height of burst is selected so as to give the optimum ground pattern in which the lethal areas of the bomblets overlap. The bomblets contain a charge of 25 g Composition A5 and are impact fuzed. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

81 mm submunition TP bomb S8A1

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm submunition TP bomb S8A1

Armament 81 mm TDA and other medium-pressure mortars. Development By Simmel Difesa for use as a training round to simulate the effect of the submunition bomb S6A2. Description This bomb is the same as the submunition bomb S6A2 described previously, except that the submunitions are filled with a smoke-producing compound to indicate their point of impact on the ground. The weights, dimensions and ballistic performance are identical in all respects to the service bomb. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

81 mm submunition bomb S6A2

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm submunition bomb S6A2

Armament 81 mm TDA and other medium-pressure mortars. Development By Simmel Difesa for use in Italian Army mortars and for export. Description The S6A2 is a parellel-walled bomb with an aluminium alloy body in two parts. The ogive and straight section form the principal unit and carry the time fuze, expelling charge, pusher plate and nine submunitions. The rear section is the tailcone of the body and is a push-fit into the forward section which is retained by shear pins. An extruded alloy tail unit screws into the end of the body. A primary cartridge fits into the tailboom and six secondary charges fit around the boom, ahead of the fins, in horseshoe containers. The bomb is drop-fired in the usual way, the time fuze being set to produce a burst 400 m above the ground at the desired range. When the fuze functions, it ignites the expelling charge; this presses on the pusher plate and the payload and, shearing the retaining pins, throws off the body tailcone and tail assembly. An explosive ejector then ejects the submunitions and disperses them around the trajectory so as to fall roughly in an ellipse of overlapping lethal zones about 50 × 20 m. Each submunition weighs 140 g, is 34 mm in diameter and 77 mm long and contains a 25 g Composition A5 shaped charge capable of penetrating 60 mm of armour. In addition there is a 5 m lethal area of fragmentation around the point of impact. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

81 mm WP smoke bomb S2A1

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm WP smoke bomb S2A1

Armament 81 mm Brandt and other medium-pressure mortars. Development By Simmel Difesa for Italian Army mortars and for export. Description The bomb body is of thin steel and comprises the ogive and parallel-walled portion of the bomb. Behind this is the body tailcone, a push-fit into the main body and secured there by pins. Attached to the end of the tailcone is the tail unit, an alloy extrusion with a perforated tail tube and 12 fins. A primary cartridge fits into the tail tube and up to six secondary charges fit around the tube in horseshoe containers. The bomb forebody is filled with White Phosphorus (WP) and has a central burster tube filled with 100 g of Composition B. The bomb is drop-fired in the usual manner. On impact with the target the percussion fuze detonates the Composition B, this bursts open the bomb and distributes the WP. This ignites spontaneously on contact with the air, producing dense white smoke and having a degree of incendiary effect. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

81 mm HC smoke bomb S5A1

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm HC smoke bomb S5A1

Armament 81 mm TDA and similar medium-pressure mortars. Development By Simmel Difesa for Italian Army mortars and for export. Description This bomb is similar to the WP smoke bomb S2A1 in appearance, but differs in the filling and in being fitted with a time fuze. Beneath the time fuze is a black powder expelling charge and a pusher plate, followed by two steel smoke canisters. These rest on a steel plate which is supported by the edge of the body tailcone, fastened to the body by shear pins. The smoke canisters have a central perforated tube and are filled with hexachloroethane/zinc (HC) smoke composition. The bomb is drop-fired in the usual manner, the time fuze having been set to an appropriate time to produce an airburst at 400 m height at the desired range. When the fuze functions, it fires the expelling charge. The explosion pressure acts on the pusher plate, which then pushes on the smoke canisters and lower steel disc, so placing pressure on the tailcone which shears the securing pins. The tailcone and tailfin unit are thrown clear. While this is taking place, the flame from the expelling charge passes through a central hole in the pusher plate and down the central tubes of the smoke canisters, igniting a priming cloth. Thus the canisters have been ignited by the time they are ejected from the body by the action of the pusher plate. They then fall to the ground, roughly following the trajectory of the bomb, by which time the priming cloth has ignited the smoke composition. Smoke is emitted for a minimum of 40 seconds. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

81 mm illuminating bomb S3A3

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm illuminating bomb S3A3

Armament 81 mm TDA and similar medium-pressure mortars. Development By Simmel Difesa for Italian Army mortars and for export. Description This is similar to the base ejection HC smoke bomb S5A1 described previously, differing only in its payload. This consists of a folded parachute and an illuminating flare container carried below the pusher plate in the forebody. The flare container, mouth upwards, is immediately below the pusher plate. The folded parachute is surrounded by two curved metal supports. These serve to transmit pressure from the flare container to the steel plate in the bottom of the forebody. When the time fuze functions, it fires the expelling charge, and the explosion pressure pushes on the flare container and, via the two metal supports and the bottom disc, against the tailcone of the body. This shears the attachment pins and the tailcone and fin unit are thrown clear. The flame from the expelling charge ignites the illuminating composition inside the flare container and the pressure pushes the container, parachute and supports out of the bomb body. The supports fall away, the parachute deploys and the flare is lowered to the ground, delivering area illumination during its fall. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

81 mm flash, sound and smoke bomb S9A1

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

81 mm flash, sound and smoke bomb S9A1

Armament 81 mm TDA and other medium-pressure mortars. Development By Simmel Difesa to provide a training bomb capable of indicating fall of shot at long ranges. Description The bomb consists of an aluminium alloy body, the nose of which is threaded to accept a percussion fuze and an extruded aluminium tail unit which is screwed into the end of the body. The bomb body is almost entirely filled with inert material; a central burster tube carries a charge of flash and sound mixture (black powder based). A primary cartridge is fitted into the tail tube and six secondary charges fit around the tail tube in horseshoe containers. The bomb is fired in the normal way; on impact with the ground the fuze ignites the flash and sound composition, this produces a strong signature capable of being seen over 1,000 m from the point of burst. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

120 mm smoke bomb WP

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

120 mm smoke bomb WP

Armament All 120 mm smoothbore mortars. Development By SNIA-BPD for Tampella mortars in Italian service and general use. Description This uses the same body, tail unit and propulsion system as the HE bomb described previously. The nose is closed by a heavy adaptor which carries a burster tube, extending almost the full length of the body cavity. A percussion fuze fits into the adaptor and the cavity space around the exploder is filled with White Phosphorus (WP) smoke composition. Manufacturer SNIA-BPD Defence.Read More

120 mm smoke bomb HC

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

120 mm smoke bomb HC

Armament All 120 mm smoothbore mortars. Development By SNIA-BPD for Tampella mortars in Italian service and general use. Description This resembles the HE and smoke bombs and uses the same tail unit and propulsion system. However, the body is divided about 120 mm from the junction with the tail tube, a tailcone is press fitted into the body and secured by four shear pins. A lip on the cone supports two smoke canisters which occupy the remainder of the body. Above the canisters is a black powder expelling charge held in a nose adaptor, into which a time fuze is screwed. Upon the functioning of the time fuze the expelling charge is exploded. The flash ignites the two smoke canisters and the gas pressure forces the canisters against the lip on the tailcone, so shearing the pins and causing the tailcone and tail unit to fall away. The pressure then ejects the burning smoke canisters, these fall to the ground and emit smoke. Manufacturer SNIA-BPD Defence.Read More

120 mm submunition bomb S12B

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

120 mm submunition bomb S12B

Armament All 120 mm smoothbore mortars. Development By Simmel Difesa , for Italian and other TDA pattern 120 mm mortars. Description The body is of steel and in two parts; the forward section has its nose threaded to accept a time fuze, while the rear section has the tail end recessed and threaded to accept the tailboom. The two sections push-fit together and are secured by a number of shear pins. Beneath the fuze there is an expelling charge and a pusher plate and in the forward part of the body are 12 submunitions. Beneath the submunitions is a steel plate which rests upon the inner lip of the rear body section. The tail unit is extruded from steel and has a tailboom and 12 fins. The primary cartridge fits into the tailboom and the four secondary charges fit around the tailboom, ahead of the fins, in horseshoe containers. The bomb is drop loaded and fired in the usual way. When the time fuze functions, it ignites the expelling charge and the subsequent explosion presses down on the pusher plate. The force is transmitted to the steel plate below the submunitions, this pushes on the rear section, shears the securing pins and throws the rear section and tail unit clear. A distributing charge in the bomb then fires, ejecting the submunitions and dispersing them around the trajectory. The bombs then fall to the ground and are fuzed to burst on impact. Each bomb contains a shaped charge of Composition A5 weighing 25 g. The bomb is designed to burst at a height of 400 m above the ground, in order to obtain a dispersal pattern which ensures overlap between the individual bomblets. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

120 mm submunition TP bomb S15B

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

120 mm submunition TP bomb S15B

Armament All 120 mm smoothbore mortars. Development By Simmel Difesa as a training round to simulate the submunition bomb S12B. Description This bomb is exactly the same as the S12B bomb described previously, except that the submunitions contain smoke composition. The method of functioning is identical, but when the submunition bomblets land on the ground no explosions take place and a smoke cloud is emitted. The weight, dimensions and ballistic performance are exactly as the S12B. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

120 mm smoke bomb S11B

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

120 mm smoke bomb S11B

Armament All 120 mm smoothbore mortars. Development: By Simmel Difesa for Italian and other Brandt-pattern 120 mm mortars. Description This is a conventional White Phosphorus (WP) smoke bomb. It has a steel body filled with WP and is closed at the forward end by an adaptor, which incorporates a thin steel tube on the axis of the bomb. This tube is filled with a charge of Composition B and the adaptor is threaded to accept a percussion fuze. The tail end of the body is recessed and threaded to accept the extruded steel tail unit which comprises a perforated tail tube and 12 fins. The propelling charge consists of a primary cartridge, inserted into the tail tube and four secondary charges fitted around the tail tube in horseshoe containers. The bomb is drop-fired in the usual way. On impact with the target area, the filling of Composition B is detonated, providing sufficient force to break open the shell and distribute the WP around the point of impact. The WP then ignites spontaneously giving a smoke cloud and incendiary effect. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

120 mm flash, sound and smoke bomb S14B

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

120 mm flash, sound and smoke bomb S14B

Armament All 120 mm smoothbore mortars. Development By Simmel Difesa to provide a training bomb, allowing the point of impact to be observed from distances up to 3 km away. Description This is a conventional bomb using a steel body and extruded 12-fin steel tail unit. Most of the body space is filled with inert material, but a central tube carries 300 g of Flash, Sound and Smoke (FSS) mixture, a black-powder based composition. An impact fuze fits in the nose. On impact, the fuze ignites the FSS composition and the resulting explosion can be seen and heard for considerable distances. The bomb is broken up, but the design has been optimised to keep the danger radius to the minimum. The propelling charge is the same as the WP smoke bomb S11B, described previously and the ballistic performance, weights and dimensions are all exactly as for the S11B. Manufacturer Simmel Difesa SpA.Read More

Simmel difesa

FB 282

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Armament 81 and 120 mm smoothbore mortar bombs. Development By Borletti for mortars in Italian service. Description The FB 282 fuze is a dual-purpose super-quick or delay type, designed for use with 81 or 120 mm mortars. The fuze uses a direct action striker for super-quick functioning and a graze pellet and pyrotechnic element for delay functioning, which is designed to operate to very low-impact angles. Safety is in accordance with MIL-STD-1316 and there is a pull wire for safety in handling, shipment and paradropping. The fuze has an external Safe and Armed indicator. The fuze has a plastic nose cap, removable to increase the PD sensitivity for operations on snow or soft surfaces. Manufacturer F B Borletti.Read More

FB 332

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Armament 60, 81 and 120 mm HE bombs in smoothbore mortars. Development By Borletti for Italian Army mortars. Description An impact super-quick fuze of relatively simple design. It has a central firing pin in the nose which is aligned with a detonator and firing train but mechanically locked securely away from the detonator. The lock is removed by a mechanical escapement, released by acceleration and propelled by a spring, after the bomb has left the mortar. Manufacturer F B Borletti.Read More

FB 267A

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Armament 81 and 120 mm HE bombs in smoothbore mortars. Development By Borletti for Italian service mortars. Description An impact fuze with optional delay, with direct and graze action. A rotor carries the detonator and delay system and is locked by a pull wire before loading. A firing pin in the nose performs the SQ impact function and an internal inertia firing pin provides graze action. Manufacturer F B Borletti.Read More

FB 338

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Armament 81 and 120 mm carrier bombs. Development By Borletti for mortars in Italian service and for general use. Description A mechanical time fuze with spring-driven timing mechanism. Safety is ensured by a pull-wire which locks the timing mechanism until withdrawn before loading and by a sliding relay carrying the detonator which is out of line until the fuze has armed in flight. Manufacturer F B Borletti.Read More

FB 391

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Armament 60, 81 and 120 mm HE mortar bombs. Development By Fuchs Electronics, South Africa , licensed to Borletti to meet requirements of Italian forces. Description This is a selectable proximity/point detonating fuze, with impact back-up in the event of proximity failure. A radio fuze, it functions on the reflected signal mixing with the transmitted signal to provide a low Doppler frequency. The particular signal processing technique used ensures proximity function with sharper altitude discrimination than that obtained with an unmodulated carrier. Burst height is typically 3 m, almost independent of soil reflectivity, approach angles and terminal velocities. Arming requires setback and air flow through the turbogenerator and the electric detonator is short-circuited and out of line before firing. Two models exist; the FB 391A has the 1.5 in 12 tpi UNF thread and standard intrusion; the FB 391B has the French 35.7 × 200 metric thread and appropriate intrusion to be interchangeable with the V19P fuze. Manufacturer F B Borletti.Read More

PDB335

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Armament 60, 81 and 120 mm mortar bombs for smoothbore mortars. Development By Borletti for Italian Army mortars. Description The PDB335 is an impact super-quick design, similar to the FB332. It has a central striker that protrudes from the nose but is protected by a plastic cap. The striker is held out of alignment by a mechanical escapement, released by setback forces. The fuze body is aluminium. Manufacturer FB Borletti.Read More

Fiocchi 12 gauge rubber baton/slug

Ammunition, Missiles and precision weapons

Ammunition, Missiles and precision weapons

Fiocchi 12 gauge rubber baton/slug

Synonyms none Armament Suitably chambered 12 gauge shotguns. Development By Fiocchi for use in crowd control at distances of 15 to 40 m. Description The Fiocchi rubber baton round is intended for use in crowd control situations at ranges up to 40 m. At ranges closer than 15 m, the baton may cause serious injury. Like most other Fiocchi tactical shotgun shells, the rubber baton round is loaded in a plastic roll crimped case with a clear plastic closure disc for positive visual identification. ITALY Manufacturer Fiocchi Munizione SpA Via Santa Barbara 4 I-22053 Lecco (Como) Italy Tel: (+39 0341) 36 36 91 UNITED STATES OF AMERICA Manufacturer Fiocchi USA, Inc 5030 Fremont Rd. Ozark, Missouri 65721 USA Tel: (+1 417) 725 41 18 Fax: (+1 417) 725 50 44 Web: http://www.fiocchiusa.comRead More

Home About Us Pricing

Ambassador Widgets Help Contact Us

Products Companies

Learning Hub Video Tutorials FAQs

Terms & Conditions Privacy Policy Cookie Policy

© Milzo Ltd, 2026 all rights reserved.

Milzo.net is an information and networking platform. We do not act as a broker, intermediary, or agent in any transaction. All data, product listings, supplier profiles, and communications are provided on an “as-is” basis and must be independently verified by users.

Milzo.net assumes no responsibility for the accuracy, legality, or safety of products, offers, or communications, including any defense-related, restricted, or dual-use items. All users are solely responsible for complying with applicable laws, export controls, licensing, and due-diligence requirements.