cookie
Файли cookie допомагають нам забезпечити безпеку сайту та покращити ваш досвід користування. Дізнайтеся більше або змініть свої налаштування файлів cookie.
Ми використовуємо файли cookie, щоб забезпечити вам найрелевантніший досвід.

Каталог оборонних продуктів — Сторінка 3

Сортувати за
Усі категорії
Виробник
Регіон
Single-antenna CPT7700 enclosure with GNSS+INS technology
Комунікація та управлінняКомунікація та управління
Canada
Single-antenna CPT7700 enclosure with GNSS+INS technology
Compact enclosure with SPAN GNSS+INS technology delivers 3D position, velocity and attitude. The CPT7700 is an ultra-compact enclosure containing an OEM7700 receiver from Hexagon | NovAtel and a high-performing Honeywell HG4930 Micro Electromechanical System (MEMS) Inertial Measurement Unit (IMU) to support leading-edge SPAN technology from NovAtel in an integrated, single enclosure solution. The absolute accuracy of Global Navigation Satellite System (GNSS) positioning and the stability of Inertial Measurement Unit (IMU) gyro and accelerometer measurements are deeply coupled to provide an exceptional 3D navigation solution with reliable velocity and attitude measurements. The internal OEM7700 receiver offers simultaneous tracking of multi-GNSS signals across all frequencies. It provides tactical grade performance for unmanned vehicles, mobile mapping and other commercial and military guidance applications. The CPT7700 is a small, lightweight and low-power solution with multiple communication interfaces for easy integration on various platforms. The deep coupling of GNSS and INS measurements enhances satellite tracking and enables the most continuous positioning possible.System Type: Enclosed with IMU GNSS+INS enabledGeneral InfoLength (mm): 90 Width/Diametre (mm) 60 Height (mm): 60 Weight (g): 500 Typical Power Consumption (W): 9Signal TrackingGPS: L1C/A, L1C, L2C, L2P, L5 GLONASS: L1C/A, L2C/A, L2P L3, L5 BeiDou: B1l, B1C, B2l, B2a, B2b, B3l Galileo E1, E5 AltBOC, E5a, E5b, E6 NavIC (IRNSS): L5 SBAS: L1, L5, L6 QZSS: L1 C/A, L1C, L2C, L5 L-Band (primary RF only): Up to 5 channelsNumber of Com PortsRS-422 : 1 RS-232: 1 Ethernet: 1 RS-232 (230 400 bps max) 1 USB Device: 1 CAN Bus: 1 Event Input: 3 Event Output: 3 Wheel Sensor Input: 1PerformanceAccuracy (RMS) Single Point L1: 1.5 m Single Point L1/L2: 1.2 m SBAS: 60 cm DGPS: 40 cm TerraStar-L: 40 cm TerraStar-C PRO: 2.5 cm TerraStar-X: 2.0 cm RTK 1 cm + 1 ppm IMU Raw Data Rate: 100 Hz or 400 HzGyroscope PerformanceTechnology: MEMS Input Rate (max) : ±325°/SAccelerometer PerformanceTechnology: MEMS Range: ±20 gЧитати далі
NovAtel
NovAtel
Dual-antenna CPT7 enclosure with GNSS+INS technology
Комунікація та управлінняКомунікація та управління
Canada
Dual-antenna CPT7 enclosure with GNSS+INS technology
Compact dual antenna enclosure with SPAN GNSS+INS technology delivers position, velocity, attitude. The CPT7 is a single enclosure Global Navigation Satellite System (GNSS) + Inertial Navigation System (INS) receiver powered by OEM7 technology from Hexagon | NovAtel that delivers up to centimetre-level accuracy. The dual-antenna inputs provide the user with heading information and rapid alignment of the combined GNSS+Inertial solution. It’s lightweight, ultra-compact and offers a low-power solution with multiple communication interfaces for easy integration on multiple platforms.The CPT7 contains a high-performing Honeywell HG4930 Micro Electro Mechanical System (MEMS) Inertial Measurement Unit (IMU) to deliver NovAtel’s world-class SPAN technology in an integrated solution. SPAN technology deeply couples GNSS positioning and the stability of IMU gyro and accelerometer measurements to enhance satellite tracking and provide the most continuous positioning solution possible.System Type: Enclosed with IMU GNSS+INS enabledGeneral InfoLength (mm): 90 Width/Diametre (mm) 60 Height (mm): 60 Weight (g): 500 Typical Power Consumption (W): 9Signal TrackingGPS: L1C/A, L1C, L2C, L2P, L5 GLONASS: L1C/A, L2C/A, L2P L3, L5 BeiDou: B1l, B1C, B2l, B2a, B2b Galileo E1, E5 AltBOC, E5a, E5b NavIC (IRNSS): L5 SBAS: L1, L5 QZSS: L1 C/A, L1C, L2C, L5 L-Band (primary RF only): Up to 5 channelsNumber of Com PortsRS-422 1 RS-232: 1 Ethernet: 1 RS-232 (230 400 bps max) 1 USB Device: 1 CAN Bus: 1 Event Input: 3 Event Output: 3 Wheel Sensor Input: 1PerformanceAccuracy (RMS) Single Point L1: 1.5 m Single Point L1/L2: 1.2 m SBAS: 60 cm DGPS: 40 cm TerraStar-L: 40 cm TerraStar-C PRO: 2.5 cm TerraStar-X: 2.0 cm RTK 1 cm + 1 ppm IMU Raw Data Rate: 100 Hz or 400 HzGyroscope PerformanceTechnology: MEMS Input Rate (max) : ±325°/SAccelerometer PerformanceTechnology: MEMS Range: ±20 gЧитати далі
NovAtel
NovAtel
KVH1750
Комунікація та управлінняКомунікація та управління
Canada
KVH1750
Provides continuous 3D position, velocity and attitude solution. The IMU-KVH1750 is designed to be paired with NovAtel's OEM6® line of receivers. Commercially exportable, it is comprised of Fiber Optic Gyros (FOG) and Micro Electromechanical Systems (MEMS) accelerometers. FOGs offer exceptionally long life and stable performance compared to similar gyro technologies.The IMU-KVH1750 offers tactical grade performance in a compact and rugged package with minimal power consumption. Paired with NovAtel's OEM6 receiver, the IMU-KVH1750 offers a fully integrated, tightly coupled GNSS and IMU system that delivers a continuous position, velocity and attitude solution.Take advantage of NovAtel CORRECT. to receive your choice of accuracy and performance, from decimetre to RTK-level positioning. For more demanding applications, Inertial Explorer® post-processing software from our Waypoint® Products Group can be used to post-process IMU.KVH1750 data to provide the system's highest level of accuracy.General InfoLength (mm): 88.90 Width/Diameter (mm): 73.70 Weight (g): 700.00 Typical Power Consumption (W): 8.00IMU Data Rate: 200 Hz Gyro Type: Fiber Optic, Gyroscope PerformancePerformanceInput rate (max.): ±490°/s Bias stability: 0.05°/hr Bias offset: ±2°/hr Scale factor: ≤50 ppm Scale factor non-linearity: ≤50 ppm< Angular random walk: 0.012°/√hrAccelerometer Performance Range: ±10 g Bias stability: 7.5 mg Bias offset: ±2 mg Velocity random walk 0.23 ft/sec/√hrЧитати далі
NovAtel
NovAtel
HG1930
Комунікація та управлінняКомунікація та управління
Canada
HG1930
OEM-HG1930 MEMS IMU. The HG1930 is a small, low cost Micro Electromechanical Systems (MEMS) Inertial Measurement Unit (IMU) manufactured by Honeywell. It provides tactical grade performance for unmanned vehicles and other commercial and/or military guidance applications. When integrated with NovAtel's Synchronous Position, Attitude and Navigation (SPAN) technology, this IMU is ideal for airborne and ground applications that require accurate 3D position, velocity and attitude data.General InfoWidth/Diameter (mm): 64.80 Height (mm): 35.70 Weight (g): 200.00 Typical Power Consumption (w): 3.00 IMU Data Rate: 100 Hz Gyro Type: MEMS IMU Info: ITAR ControlPerformanceGyro Bias In-run Stability (±deg/hr): 2 Gyro Bias Offset (deg/hr): 20 Gyro Angular Random Walk (deg/√hr): 0.125 Gyro Scale Factor (ppm): 300 Gyro Range (±deg/s): 1000 Accelerometer Bias (mg): 3 Accelerometer Scale Factor (ppm): 300 Accelerometer Range (±g): 30A proprietary MEMS Interface Card (MIC) couples the HG1930 with SPAN receivers, offering a unique, powerful GNSS+INS system for weight and size constrained applications. Designed as a board stack configuration for ease of integration, the MIC can interface directly with NovAtel's small form factor OEM615™ SPAN receiver.The HG1930 is also available as a stand alone product so integrators can easily pair it with an existing SPAN receiver.NovAtel CORRECT™ with RTK and satellite augmentation systems such as SBAS can be used to improve real-time performance and accuracy. For the most demanding applications, Inertial Explorer® post-processing software from our Waypoint® Products Group offers the highest level of accuracy.Читати далі
NovAtel
NovAtel
HG1700 AG58
Комунікація та управлінняКомунікація та управління
Canada
HG1700 AG58
UIMU-H58 Tactical Grade (RLG) Inertial Measurement Unit (IMU). The UIMU-H58 contains Honeywell's HG1700, a tactical grade IMU containing Ring Laser Gyros (RLG) and Servo accelerometers. The UIMU-HG handles the power requirements of the IMU from a 12-28 VDC power input and provides the IMU data to a SPAN® enabled GNSS/INS receiver such as the ProPak-V3™ or SPAN-SE™ using a custom NovAtel interface. IMU measurements are used by the GNSS/ INS receiver to compute a blended GNSS/INS position, velocity and attitude solution at up to 100 Hz. The HG1700 is International Traffic in Arms Regulations (ITAR) controlled and requires export approval for customers outside the United States.General InfoLength (mm): 195.00 Width/Diameter (mm): 168.00 Height (mm): 146.00 Weight (g): 4500.00 Typical Power Consumption (W): 8.00IMU Data Rate: 100 Hz Gyro Type: Ring Laser IMU Info: ITAR ControlPerformanceGyro Bias In-run Stability (±deg/hr): 1 Gyro Bias Offset (deg/hr): 1 Gyro Angular Random Walk (deg/√hr): 0.125 Gyro Scale Factor (ppm): 150 Gyro Range (±deg/s): 1000Accelerometer Bias (mg): 1 Accelerometer Scale Factor (ppm): 300 Accelerometer Range (±g): 50Honeywell's high production volume of HG1700 IMUs enables excellent tactical grade performance for an economical price with short delivery times. The UIMU-HG is available as a complete assembly including the IMU and environmentally sealed enclosure. For customers who already have the HG1700 IMU, the enclosure can be purchased separately and the IMU easily integrated inside.Take advantage of NovAtel CORRECT™ with RTK as well as support for satellite based augmentation systems such as SBAS to improve real time performance and accuracy. For the most demanding applications, our Inertial Explorer® post-processing software from our Waypoint® Products Group can be used to post-process SPAN HG data to provide the highest level of accuracy with the system.Читати далі
NovAtel
NovAtel
HG1700 AG62
Комунікація та управлінняКомунікація та управління
Canada
HG1700 AG62
UIMU-H62 Tactical Grade (RLG) Inertial Measurement Unit (IMU). The UIMU-H62 contains Honeywell's HG1700, a tactical grade IMU containing Ring Laser Gyros (RLG) and Servo accelerometers. The UIMU-HG handles the power requirements of the IMU from a 12-28 VDC power input and provides the IMU data to a SPAN® enabled GNSS/INS receiver such as the ProPak-V3™ or SPAN-SE™ using a custom NovAtel interface. The HG1700 is International Traffic in Arms Regulations (ITAR) controlled and requires export approval for customers outside the United States.General InfoLength (mm): 195.00 Width/Diameter (mm): 168.00 Height (mm): 146.00 Weight (g): 4250.00 Typical Power Consumption (W): 8.00IMU Data Rate: 100 Hz Gyro Type: Ring Laser IMU Info: ITAR ControlPerformanceGyro Bias In-run Stability (±deg/hr): 1 Gyro Bias Offset (deg/hr): 5 Gyro Angular Random Walk (deg/√hr): 0.5 Gyro Scale Factor (ppm): 150 Gyro Range (±deg/s): 1000Accelerometer Bias (mg): 3 Accelerometer Scale Factor (ppm): 300 Accelerometer Range (±g): 50Honeywell's high production volume of HG1700 IMUs enables excellent tactical grade performance for an economical price with short delivery times. The UIMU-HG is available as a complete assembly including the IMU and environmentally sealed enclosure. For customers who already have the HG1700 IMU, the enclosure can be purchased separately and the IMU easily integrated inside.Take advantage of NovAtel CORRECT™ with RTK and support for satellite based augmentation systems such SBAS to improve real time performance and accuracy. For the most demanding applications our Inertial Explorer® post-processing software from our Waypoint® Products Group can be used to post-process SPAN HG data to provide the highest level of accuracy with the system.Читати далі
NovAtel
NovAtel
OEM7600
Комунікація та управлінняКомунікація та управління
Canada
OEM7600
OEM7600 Dual-Frequency GNSS Receiver. The OEM7600 is a compact, multi-frequency Global Navigation Satellite System (GNSS) receiver that delivers robust positioning for space constrained applications. With a variety of interface options to facilitate system integration plus L-Band functionality, the OEM7600 ensures high performance GNSS positioning.The OEM7600 is capable of tracking all current and upcoming GNSS constellations and satellite signals, including GPS, GLONASS, Galileo, BeiDou, QZSS and IRNSS. This receiver has up to 555 channels in its architecture. All OEM7® firmware is field upgradable with the OEM7600. Firmware options available include NovAtel CORRECT® with RTK for centimetre level real-time positioning, ALIGN® for precise heading and relative positioning, GLIDE® for decimetre level pass-to-pass accuracy and RAIM for increased GNSS pseudorange integrity.System Type: BoardGeneral Info Length (mm): 55 Width/Diameter (mm): 35 Height (mm): 11 Weight (g): 39 Typical Power Consumption (w): 0.9Signal Tracking GPS: L1 C/A, L1C, L2C, L2P, L5 GLONASS: L1, L2, L3, L5 BeiDou: B1l, B1C, B2a, B2b, B2l Galileo: E1,E5 AltBOC, E5a, E5b SBAS: L1, L5 QZSS: L1 C/A, L1C, L2C, L5 NavIC: L5 L-Band: up to 5 channels Number of Com Ports LVCMOS: 5 CAN Bus: 2 USB Device: 1 USB (Host): 1 Ethernet: 1Performance Accuracy: (RMS) Single Point L1: 1.5 m Single Point L1/L2: 1.2 m SBAS: 60 cm DGPS (code): 40 cm TerraStar-C PRO: 2.5 cm TerraStar-C: 4 cm TerraStar-L: 40 cm RTK: 1 cm + 1 ppmЧитати далі
NovAtel
NovAtel
ISA-100C
Комунікація та управлінняКомунікація та управління
Canada
ISA-100C
High performance tactical grade IMU. The IMU-ISA-100C features Northrop-Grumman Litef GMBH's proven inertial measurement technology offering exceptional performance when paired with a NovAtel SPAN receiver. The IMU-ISA-100C is a near navigation grade sensor containing fiber optic gyros and fully temperature compensated Micro Electromechanical Systems (MEMS) accelerometers. The IMU design offers compact size, low power consumption and low weight and features an extensive set of built in tests. The IMU-ISA-100C operates from 9-34 VDC and interfaces with NovAtel's PwrPak7® through a highly reliable IMU interface. IMU measurements are used by the SPAN receiver to compute a blended GNSS+INS position, velocity and attitude solution at rates up to 200 Hz.General InfoLength (mm): 180.00 Width/Diameter (mm): 150.00 Height (mm): 137.00 Weight (g): 5000.00 Typical Power Consumption (W): 18.00IMU Data Rate: 200 Hz IMU Info: Wheel Sensor InputPerformanceInput range: ±495 deg/sec Bias stability: ≥0.5 deg/hr Angular random walk: 0.012 deg/√hr Accelerometer Range: ±10 g Bias repeatability: ≥1250 µgThe IMU-ISA-100C offers extremely high performance and precise accuracy at an affordable price point. It is commercially exportable and offers an ideal solution for applications such as platform stabilization, general purpose navigation, photogrammetry, remote sensing and ground mobile mapping.For more demanding applications, Inertial Explorer® post-processing software from our Waypoint® Products Group can be used to post-process SPAN IMU-ISA-100C data for the highest level of system accuracy.Читати далі
NovAtel
NovAtel
© Milzo Ltd, 2026 всі права захищені.
Milzo.net є інформаційною та мережевою платформою. Ми не виступаємо брокером, посередником чи агентом у жодній транзакції. Усі дані, товарні пропозиції, профілі постачальників і комунікації надаються «як є» і мають бути самостійно перевірені користувачами.

Milzo.net не несе відповідальності за точність, законність або безпеку продуктів, пропозицій чи комунікацій, включно з товарами оборонного призначення, обмеженими або подвійного використання. Усі користувачі несуть повну відповідальність за дотримання чинного законодавства, експортного контролю, ліцензування та вимог належної перевірки.