Увійти Тест-драйв

Файли cookie допомагають нам забезпечити безпеку сайту та покращити ваш досвід користування. Дізнайтеся більше або змініть свої налаштування файлів cookie.

Ми використовуємо файли cookie, щоб забезпечити вам найрелевантніший досвід.

Каталог оборонних продуктів — Сторінка 123

Сортувати за

Усі категорії

Виробник

Регіон

M524 Series

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 81 mm HE and WP smoke bombs. Development Originally developed by US ordnance authorities but now manufactured under licence elsewhere. Description The fuze has an aluminium body threaded externally to fit the round and internally to accept a tetryl booster. The fuze nose is a spring-loaded striker with a slot for selection of super-quick or delay action. Either detonating train is initiated by independent firing pins. The delay train includes a primer and M2 delay charge. Bore safety is provided by a delayed arming mechanism consisting of a spring-loaded rotor released by setback when the mortar is fired and a timing device. There are two safety pins - one for the internal plunger and the other to secure the setback arming device. Setback trips the arming mechanism release, allowing the arming rotor to turn toward the armed position. This mechanism assures that arming will occur no earlier than 1.25 seconds and no later than 2.5 seconds after the round has left the mortar tube. If delay is selected, the firing pin is not aligned with the M63 detonator and charge detonation occurs 0.05 second after the delay firing pin operates on the delay train through the M2 delay charge. Each mode operates by separate flash tubes upon the M80 detonator, the booster lead charge and the booster. Manufacturer US Military contractors.Читати далі

M935

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament US service 60 mm and 81 mm HE bombs. Development By US ordnance authorities for current service bombs. Description The M935 is a selectable SQ or delay fuze using two independent detonators, the M98 for super-quick functioning and the M76 with 50 ms delay for use against light cover. Delayed arming is provided by the M53 delay unit which maintains the explosive train out of line for 3 seconds after firing. This fuze and the M567 are identical except for the booster and threads for the fuze well adaptor. For details of functioning, see description under M567 listing. Manufacturer Bulova Technologies Inc.Читати далі

M567

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament US 81 mm HE bombs, M374 series and WP bombs, M375 series used in US 81 mm mortars, M1, M29A1 and M252 . Development By US ordnance authorities for service bombs. Description The M567 is identical to the M935, except for the addition of a 2-12UNS to 1.5-UNF adaptor booster for use in 81 mm mortar bombs with 2 in threads. It is the addition of this booster that gives the M567 its additional length and weight in comparison to the M935. Safety is via a pull pin and arming pin that lock the arming slider. The arming pin is retained by the M53 pyrotechnic delay and the pull pin. Before firing, the fuze is set by rotating a slotted shaft in the ogive and removing the pull pin. On firing, setback moves a plunger pin rearward against its spring, freeing a ball detent that releases the fuze firing pin. The firing pin is spring loaded and moves forward after acceleration, partially releasing the slider. Acceleration also moves a second plunger that releases a delay arming firing pin to the rear, functioning the M53 delay. When the delay train has buried from 2 to 6 seconds, it removes the arming pin from the slider that arms the super-quick or delay alignment. On impact, the fuze firing pin fires the M98 super-quick or M76 delay detonator that initiates the lead and booster.Читати далі

M65 and M65A1 time fuzes

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

M65 and M65A1 time fuzes

Armament 60 mm mortar illuminating rounds, M83A1, M83A2 and M83A3 (M65A1 fuze). Development By US Army Ordnance. Description The M65 series fuzes are powder train, fixed delay types used with 60 mm mortar illuminating ammunition. The time train is a powder type, consisting of a primer, black powder pellet, time ring charge loaded to burn for 15 seconds, body pellet and a black powder expelling charge. After the flame from the time ring charge encircles the ring, it ignites the body pellet, which in turn ignites the expelling charge. The expelling charge gases pass through apertures in the expelling charge retaining disc, ejecting the parachute and illuminating charge assemblies from the base of the bomb. The M65A1 is similar, but has a heavier time ring train and minor construction differences. The M65 is no longer in production. Manufacturer US government contractors.Читати далі

M84 and M84A1 time fuzes

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

M84 and M84A1 time fuzes

Armament 81 mm illuminating rounds. Development By US Army Ordnance. Description The M84 and M84A1 fuzes are of the single-purpose, powder train, selective time types and are used only with 81 mm illuminating ammunition. The two fuzes are identical, save for powder train chemicals and the fact that the M84A1 has a time scale of 50 seconds with 2 second intervals, while the M84 has a range of 25 seconds with 5 second intervals. The fuzes consist of a primer, powder train, timing rings and a black powder expelling charge. The fuze is armed by removing the safety wire. At this point the inertial plunger is held by two shear pins passing through the plunger guide. Setback causes the plunger to shear the pins and strike the primer at the base of the plunger guide. The primer ignites the powder train, which burns for the preset time and then ignites a black powder pellet and the expelling charge. The expelling charge ejects the parachute and illuminant assemblies through the base of the projectile. Manufacturer US government contractors.Читати далі

M768 time fuze

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament M301A3 and M853 81 mm illuminating bombs and M819 smoke bomb. Development By US Army Ordnance as a replacement for the M84A1 time fuze. Description The M768 is a waterproof powder train delay fuze that utilises tungsten, as a delay composition can be set for up to 62 seconds and has only one time ring. Safety is provided by a safety pull wire and a shear pin in the firing pin, plus non-alignment of the firing train until the fuze is set. Upon firing, setback moves the firing pin to the rear severing the shear pin and firing the M39A1 primer. The primer ignites the A1A ignition powder, which ignites the tungsten delay composition in the time ring. After the set delay burns through, it ignites a boron-potassium-nitrate pellet that in turn ignites a black powder expelling charge. The M768 is identical to the M84A1E1 and similar to the M769, except that the M768 is larger. Manufacturer US government contractors.Читати далі

M769 time fuze

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament M83A3 and M721 60 mm illuminating mortar bombs. Development By US Army Ordnance as a replacement for the M65A1 time fuze. Description The M769 is identical to the M65A1E1 pyrotechnic time fuze and is functionally identical to the M768. For a description of fuze functioning, see the entry under M768. The M769 can be set from 3 to 45 seconds delay by simply rotating the nose of the fuze. Manufacturer US government contractorsЧитати далі

M936 time fuze

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament M802A2 60 mm mortar smoke bomb. Development By US Army Ordnance. Description The M936 is an impact, super-quick (SQ) and delay fuze for use in the M802A2 60 mm mortar smoke bomb fired from M2, M19 and M224 mortars. Safety is via a pull pin and arming pin which lock the arming slider. The arming pin is restrained by the M53 pyrotechnic delay and the pull pin. The fuze is set before firing by rotating a slotted shaft in the fuze body and removing the pull pin. Upon firing, setback forces move a plunger pin rearward against its spring, freeing a ball detent and the firing pin. The firing pin moves forward after acceleration under spring pressure and partially frees the slider. Acceleration also moves a second plunger to the rear, releasing a second ball that frees a delay arming firing pin. Acceleration moves this pin rearward, firing the M53 delay. After the 2 to 6 second delay has burned, it removes the arming pin from the slider that arms the SQ or delay alignment. On impact, the fuze firing pin fires the M98 SQ or M76 delay detonator, which initiates the lead and booster. Manufacturer US government contractors.Читати далі

M532 proximity fuze

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

M532 proximity fuze

Armament 81 mm mortars having standard fuze cavities of 2.00-12NS-1. Development By US Army Ordnance. Description The M532 is a radio frequency-type proximity fuze for all 81 mm mortars having standard fuze wells. The proximity element functions over land or water and the fuze will function upon impact if the proximity function fails. The M532 can also be set to disable the proximity function if impact functioning is desired. This is accomplished by turning the nose cap. Once selected, the point detonation function is irreversible. Arming is initiated by setback forces, which must actuate both an electrical and mechanical system. Airburst over the target is 3.04 to 4.5 m. The fuze consists of a ribbed plastic nose attached to an aluminium ring, which is in turn attached through a slip joint to an aluminium base. A steel housing is screwed into the base. Radio transmitter/detector and amplifier/triggering circuits are contained within the plastic nose. A thermal reserve battery within the base supplies power to the electronic circuits. A setback-initiated arming delay clock, detonator and booster pellet are contained within the steel housing. The nose and attached ring are turned {1/3} turn or more in the direction indicated to change the mode of operation from proximity to impact. It cannot be reset. A shear pin prevents accidental turning during normal handling. Manufacturer US government contractors.Читати далі

M734 multi-option fuze

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

M734 multi-option fuze

Armament 60 mm mortar bomb, M224 and 81 mm mortar bomb, M252 or any bomb with fuze cavity threads of 1.5-12-UNF-1A. Development By US Army Ordnance. Description The M734 is a multi-option fuze that may be set in any one of four options: proximity with burst height of 1 to 4 m; near surface burst with burst height of 0 to 1 m; super-quick impact and delay of 50 to 1.5 ms. The fuze is delivered in proximity mode, but settings can be changed manually by the user. The fuze is made safe by restraining the rotor with an acceleration/time sensing device and an airflow-operated detent. The fuze is set by rotating the head to the desired function. Upon firing, setback forces move a weight rearward through a zig-zag track to sense proper time and acceleration. This partially releases the rotor and frees a turbine alternator. In flight, airflow through the turbine retracts the threaded detent, completely freeing the rotor. The rotor is spring driven and, when free, moves into the `armed' position, completing the fuze electrical circuits. The alternator also powers the fuze electronics, including a timing circuit that delays firing until 2 to 3 seconds after the rotor has fully armed. When the continuous-wave radio frequency Doppler radar signal reaches the proper value, the firing circuit functions, firing the M100 detonator. When set SQ, an electric switch closes at impact and fires the M100 detonator. When set delay, an inertial firing pin functions a delay that initiates the M61 detonator. Manufacturer US government contractors.Читати далі

M521

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 107 mm (4.2 in) mortar bombs. Development By US Army Ordnance for use in M328 and M328A1 mortar bombs. Description This is a super-quick or delay impact fuze that may be set via a slotted turnscrew on the fuze body. If set for SQ, on firing, centrifugal forces move a radial interrupter outward, opening a flash channel. Two radial plungers move outward, releasing the M1 delay plunger. A centrifugal latch rotates and locks detents in the outward position. On impact, the firing pin crushes the cup and fires the M24 detonator, which sends burning gases down the flash tube. If the fuze is set to delay, the interruptor stops the burning gases, but the M1 plunger moves forward striking the delay firing pin, firing the M2 delay, consisting of the M54 primer, a 0.05 second delay and the M7 relay. The M521 fuze is identical to the M48 , except for the diameter of the rear body and the fuze threads. Manufacturer US government contractors.Читати далі

M526 and M526A1

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

M526 and M526A1

Armament 60 mm HE, 81 mm HE and WP/Smoke ammunition with 2-12UNS-1A fuze well threads. Development By US Army Ordnance. Description The M526 and M526A1 fuzes are single-action, super-quick types with direct action firing mechanisms. Bore safety is provided by a slider-type interruptor that holds the detonator out of alignment with the firing pin and booster when in unarmed status. The slider is held in place by a bore riding pin which is, in turn, held in place by a setback pin. Upon firing, setback forces move one setback pin to the rear, releasing the bore safety pin that is forced outward by its spring. As the bomb leaves the muzzle, the pin is ejected, partially releasing the slider. Acceleration also moves the second setback pin to the rear, releasing the wheel and pallet of a spring-loaded runaway escapement disk. This disk rotates 270º in approximately 3 seconds, releasing the spring-loaded firing pin that, in turn, releases the slider, which moves into and is locked in the armed position. Upon impact, the plunger carries the firing pin to the rear, where it functions the detonator. The M526A1 is identical to the M526, save for slight differences in the plunger and pull wire. The M525 and M526 fuzes are identical except for the thread adaptors and booster charges. Manufacturer US government contractors.Читати далі

M527 series

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 60 mm mortar White Phosphorus (WP) smoke bombs. Development By US Army Ordnance. Description The M527 fuze is generally similar to the M525 and M526 series fuzes, except that it is intended for use only in WP mortar bombs. The body materials of the M527 series are also different from the others. The M527 and M527A1 have plastic bodies, while the M527B1 and the M527A1B1 have aluminium bodies. Functioning is identical to the M525 and M526 series fuzes. The heads of these fuzes contain a spring-loaded striker, direct-acting firing pin, and a clockwork mechanism to delay arming to a safe distance from the muzzle of the mortar. The head is threaded into a body of plastic or aluminium (dependent upon model). The body contains a cylindrical slider to position the detonator, a booster lead charge, and a small tetryl booster charge carried in an intrusion within the base of the fuze. Positive safety for shipment and handling is provided by a safety wire and pull wire. Manufacturer US government contractors.Читати далі

M525/M525A1

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 60 and 81 mm HE and 81 mm TP or WP smoke bombs. Development By US Army Ordnance. Description The head of the fuze contains a spring-loaded striker, direct-acting firing pin, and a clockwork mechanism to delay arming for a safe distance from the muzzle of the mortar. The head is threaded into an aluminium body containing a cylindrical slider to position the detonator, and a booster lead charge. Positive safety is provided by a safety pin to be removed just before firing. Note: the M525A1 is for training purposes only.Читати далі

M717

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 60 mm HE mortar bombs. Development By US Army Ordnance. Description The M717 is a super-quick impact fuze. The aluminium fuze head contains a spring-loaded striker and firing pin. A spring-loaded cylindrical slider, mounted transversely in the aluminium fuze body, contains the detonator and is equipped with an O-ring pressure seal. Inbore safety is provided by a spring-loaded bore riding pin that locks the slider. A pull wire restrains the setback pin (not shown in illustration) which locks the bore riding pin. Tape and a plastic disc protect the metering orifice. The fuze base contains a tetryl booster lead charge. A cup containing a tetryl booster pellet is threaded to the base.Читати далі

M716

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 81 mm HE and WP smoke mortar bombs. Development By US Army Ordnance. Description The M716 is a super-quick delay arming impact fuze. The aluminium fuze head contains a spring-loaded striker and firing pin. A spring-loaded cylindrical slider, mounted transversely in the aluminium fuze body, contains the detonator and is equipped with an O-ring pressure seal. Inbore safety is provided by a spring-loaded bore riding pin that locks the slide. A pull wire restrains the setback pin (not shown in illustration) which locks the bore riding pin. Tape and a plastic disc protect the metering orifice. The fuze base contains a booster lead charge and a booster charge. An adaptor assembly with two tetryl booster pellets and a cup with one pellet are threaded to the base.Читати далі

M745

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 60 mm smoke bombs, M722. Development By US Army Ordnance. Description The fuze has a similar exterior configuration to the M734 multi-option fuze, a two-piece plastic/aluminium head, and an aluminium base. The head contains a turbine. The base contains a safe and arming device. The fuze functions on impact with variable point detecting action only.Читати далі

M719

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 60 mm mortar WP smoke bombs. Development By US Army Ordnance. Description The aluminium fuze head contains a spring-loaded striker and firing pin. A spring-loaded cylindrical slider, mounted transversely in the aluminium fuze body, contains the detonator and is equipped with an O-ring pressure seal. Inbore safety is provided by a spring-loaded bore riding pin that locks the slider. A pull wire restrains the setback pin which locks the bore riding pin. Tape and a plastic disc protect the metering orifice. The fuze base contains a tetryl booster lead charge and a small tetryl booster charge.Читати далі

M751

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Armament 81 mm M879 practice bomb. Development By US Army Ordnance. Description The fuze has an aluminium body with an M734 multi-option fuze ogive or an M935 impact fuze ogive, a pyrotechnic smoke cartridge, a striker and an arming mechanism.Читати далі

Cartridge, 40 mm, HE, M684

Боєприпаси, ракети та високоточне озброєння

Боєприпаси, ракети та високоточне озброєння

Cartridge, 40 mm, HE, M684

Armament High-velocity grenade launchers. Development By US Army Ordnance. Description This cartridge is a high-explosive round designed to inflict personnel casualties from air burst effect. This cartridge is a fixed round of ammunition consisting of a one-piece internally embossed steel body with a metal rotating band and a cartridge case containing the propelling charge and percussion primer. The projectile cavity contains a Composition A5 bursting charge. An electric proximity fuze is threaded into the front opening of the projectile. The fuze assembly includes all-solid-state circuitry, liquid reserve power supply, electronic detonator, mechanical safety arming mechanism and an independent mechanical impact element. The projectile assembly is press-fitted into a cartridge case. The case is a hollow bi-chambered aluminium cylinder with an aluminium closing plug crimped into the open well of the propellant chamber in the cartridge base. The propelling charge is contained in the spherical high-pressure propellant chamber. This chamber has vent holes in the top and is sealed at the bottom by the closing plug. The hollow chamber in the upper section of the case acts as a low-pressure chamber. A percussion primer is crimped into the centre opening in the closing plug. Manufacturer US government contractors.Читати далі

Головна Про нас Ціни

Амбасадор Віджети Допомога Зв’язатися з нами

Продукти Компанії

Навчальний центр Відеоуроки Найчастіші запитання

Умови та положення Політика конфіденційності Політика cookie-файлів

© Milzo Ltd, 2026 всі права захищені.

Milzo.net є інформаційною та мережевою платформою. Ми не виступаємо брокером, посередником чи агентом у жодній транзакції. Усі дані, товарні пропозиції, профілі постачальників і комунікації надаються «як є» і мають бути самостійно перевірені користувачами.

Milzo.net не несе відповідальності за точність, законність або безпеку продуктів, пропозицій чи комунікацій, включно з товарами оборонного призначення, обмеженими або подвійного використання. Усі користувачі несуть повну відповідальність за дотримання чинного законодавства, експортного контролю, ліцензування та вимог належної перевірки.